All the calculations for the error-checking are rounded to    
  decimal places. You can change this  
  by deleting the blue number (on the upper left) and entering  
  the number of decimal places you prefer. If you enter a number  
  that is excessively high you may get error messages when  
  there are no errors. are no errors.  
 

 

 
  Trig Calculator 1 Solves the Following Equation for X  
                                                      
  A*B*Tan(X)+A*(Sin(D))n+B*(Cos(D))n = M
 
  Coefficient: A =  
  Coefficient: B =  
  n is an exponent: n =  
  See equation above: M =  
  Angle D Degrees =  
  Calculated results are in red type below  
  Angle D in radians =  
  Spreadsheet formula for the above is =RADIANS(D_in_Degrees)  
  Tan(X) =  
  Spreadsheet formula for the above is =(M-(A*(SIN((D)))^n+B*(COS(D))^n))/(A*B)  
  Radians X =  
  Spreadsheet formula for the above is =ATAN(TanX)  
  Degrees X =  
  Spreadsheet formula for the above is =DEGREES(X)  
  The Calculator checks its results by substituting the calculated values into  
  the equation: A*B*Tan(X)+A*(Sin(D))n+B*(Cos(D))n = M If the value the user  
  entered for M is the same as the calculated value for M, the results are accurate.  
  To prevent rounding errors the following is rounded to decimal places.  
  Calculated_value_for_M =  
  Spreadsheet formula for above =ROUND(A*B*TAN(X)+A*(SIN(D))^n+B*(COS(D))^n, Rr)  
  Value user entered for M =  
  Spreadsheet formula for the above is =ROUND(M, Rr)  
   
  Spreadsheet formula for above =IF(CalcForM=UserForM,"No Errors","Error")  
     
 

   

 
  Trig Calculator 2 Solves the Following Equation for X.  
                                                       
  A.*Tan(X.)+B.*(Tan(D.))n. = M.  
  Coefficient: A. =  
  Coefficient: B. =  
  Exponent: n. =  
  See equation above: M. =  
  Angle D._in_ Degrees =  
  Calculated results are in red type below  
  Angle D. in radians =  
  Spreadsheet formula for the above is =RADIANS(D._in_Degrees)  
  Tan(X.) =  
  Spreadsheet formula for the above is =(M.-(B.*(TAN(D.))^n.) )/A.  
  Radians X. =  
  Spreadsheet formula for the above is = ATAN( (M.-(B.*(TAN(D.))^n.) )/A.)  
  Degrees X. =  
  Spreadsheet formula for the above is =DEGREES(X.)  
  The Calculator checks its results below, by substituting the calculated values into  
  the equation: A.*(Tan(X.))^n+B.*(Cot(D.))^n = M. If the value the user entered  
  for M. is the same, as the calculated value for M. the results are accurate.  
  To prevent rounding errors the following is rounded to decimal places.  
  Calculated value for M. =  
  Spreadsheet formula for the above is =ROUND(A.*TAN(X.)+B.*(TAN(D.))^n.,Rr)  
  Value user entered M. =  
  Spreadsheet formula for the above is =ROUND(M., Rr)  
   
  Spreadsheet formula for =IF(CalcForM.=UserForM.,"No Errors","Error")  
     
 

 
  Trig Calculator 3 Solves the Following Equation for X_  
                                                      
  TAN(X_)+A_*(SIN(d_))n_+B_*(COS(d_))n_ = M_  
  Coefficient:A_ =  
  Coefficient:B_ =  
  Exponent: n_ =  
  See equation above: M_ = 2
  Angle d in Degrees =  
  Calculated results are in red type below  
  Angle d_ in Radians =  
  Spreadsheet formula for the above is =RADIANS(Angle_d_in_Degrees)  
  Tan(X_) =  
  Spreadsheet formula for the above is = M_-(A_*(SIN(d_))^n_+B_*(COS(d_))^n_ )  
  Radians X_ =  
  Spreadsheet formula for the above is =ATAN(TanX_)  
  Degrees X_ =  
  Spreadsheet formula for the above is =DEGREES(X_)  
  Results are checked below by substituting calculated values into the equation:  
  TAN(X_)+A_*(SIN(d_))n_+B_*(COS(d_))n_ = M_ If the value the user entered  
  for M_ is the same, as the calculated value for M_, the results are accurate.  
  To prevent rounding errors the following is rounded to decimal places.  
  Calculated value for M_ =  
  Spreadsheet formula for above=ROUND(TAN(X_)+A_*(SIN(d_))^n_+B_*(COS(d_))^n_,Rr)  
  Value the user entered for M_ =  
  Spreadsheet formula for above =ROUND(M_, Rr)  
   
  Spreadsheet formula for above =IF(CalcForM_=UserForM_,"No Errors","Error")  
     
 

  

 
  Trig Calculator 4 Solves the Following Equation for Xa  
                                                      
  Aa*(Tan(Xa))Ea+Ba*(SIN(Ca))Ea +Ba*(COS(Ca))Ea = Sa  
  Coefficient: Aa =  
  Coefficient:Ba =  
  Exponent:Ea =  
  See equation above: Sa =  
  Angle_Ca_Degrees =  
  Calculated results are in red type below  
  Angle Ca in radians =  
  Spreadsheet formula for the above is =RADIANS(Angle_Ca_Degrees)  
  Tan(Xa) =  
  Spreadsheet formula above =((Sa-(Ba*(SIN(Ca))^Ea +Ba*(COS(Ca))^Ea) )/Aa )^(1/Ea)  
  Radians Xa =  
  Spreadsheet formula for the above is =ATAN(TanXa)  
  Degrees Xa =  
  Spreadsheet formula for the above is =DEGREES(Xa)  
  The Calculator checks its results by substituting the calculated values  
  into the equation: Aa*(TAN(Xa))Ea+Ba*(SIN(Ca))Ea +Ba*(COS(Ca))Ea = Sa  
  If the value the user entered for Sa is the same as  
  the calculated value for Sa, the results are accurate.
 
  To prevent rounding errors the following is rounded to decimal places.  
  Calculated value for Sa =  
  Spreadsheet formula for above:  
  =ROUND(Aa*(TAN(Xa))^Ea+Ba*(SIN(Ca))^Ea+Ba*(COS(Ca))^Ea, Rr)  
  Value entered for Sa =  
  Spreadsheet formula for the above is =ROUND(Sa, Rr)  
   
  Spreadsheet formula for Error-Checking is=IF(G116=G117,"No Errors","Error")  
     

   

  Trig Calculator 5 Solves the Following Equation for Xb  
                                                      
  Bb*Ab*Tan(Xb)=Sb  
  Coefficient: Ab =  
  Coefficient:Bb =  
  See equation above: Sb =  
  Calculated results are in red type below  
  TAN(Xb) =  
  Spreadsheet formula for the above is =Sb/(Bb*Ab)  
  Radians Xb =  
  Spreadsheet formula for the above is =ATAN(TanXb)  
  Degrees Xb =  
  Spreadsheet formula for the above is =DEGREES(Xb)  
  The Calculator checks results below by substituting calculated values
 
  into the equation: Bb*Ab*Tan(Xb)=Sb If the value the user entered for  
  Sa is the same as the calculated value for Sa, the results are accurate.  
  To prevent rounding errors the following is rounded to decimal places.  
  Calculated value for Sb =  
  Spreadsheet formula for above =ROUND(Bb*Ab*TAN(Xb), Rr)  
  Value entered by user for  
  Spreadsheet formula for above =ROUND(Sb, Rr)  
   
  Spreadsheet formula for above =IF(CalcForSb=UserForSb,"No Errors","Error")  
 

 
  Trig Calculator 6 Solves the Following Equation for Xc  
                                                     
  Ec*( Tan(Xc)+SIN(Cc) ) = Sc  
  Coefficient:Ec =  
  See equation above: Sc =  
  Angle Cc in Degrees =  
  Calculated results are in red type below  
  Angle Cc in radians =  
  Spreadsheet formula for the above is =RADIANS(Angle_Cc_in_Degrees)  
  Tan(Xc) =  
  Spreadsheet formula for the above is =(Sc/Ec)-SIN(Cc)  
  Radians Xc =  
  Spreadsheet formula for the above is =ATAN(TanXc)  
  Degrees Xc =  
  Spreadsheet formula for the above is =DEGREES(Xc)  
  The Calculator checks results by substituting calculated values into the equation:
 
  Tan(Xc)*( SIN(Cc)*COS(Cc) )(SIN(Cc)*Ec ) = Sc If the value the user entered  
  for Sc is the same, as the calculated value for Sc, the results are accurate.  
  To prevent rounding errors the following is rounded to decimal places.  
  Calculated value for Sc =  
  Spreadsheet formula for above is =ROUND(Ec*(TAN(Xc)+ SIN(Cc)),Rr)  
    Sc=  
  Spreadsheet formula for the above =ROUND(Sc, Rr)  
   
  Spreadsheet formula for above is =IF(CalcForSc=UserForSc,"No Errors","Error")  
     
 

  

 
  Trig Calculator 7 Solves the Following Equation for Xd  
                                                     
  Xd (SIN(Cd)+COS(Cd)) = Sd  
  See equation above: Sd =  
  Angle_Cd_in_Degrees =  
  Calculated results are in red type below  
  Angle Cd in radians =  
  Spreadsheet formula for the above is =RADIANS(Angle_Cd_in_Degrees)  
  Xd =  
  Spreadsheet formula for the above is =Sd^(1/(SIN(Cd)+COS(Cd)))  
  The Calculator checks its results by substituting the calculated values  
  into the equation: Xd (SIN(Cd)+COS(Cd)) = Sd If the value the user entered for  
  Sd is the same as the calculated value for Sd, the results are accurate.
 
  To prevent rounding errors the following is rounded to decimal places.  
  Calculated value for Sd =  
  Spreadsheet formula for the above =ROUND(Xd^(SIN(Cd)+COS(Cd)),Rr)  
  Value the user entered for Sd =  
  Spreadsheet formula for the above =ROUND(Sd, Rr)  
   
  Spreadsheet formula for above =IF(CalcForSd=UserForSd,"No Errors","Error")  
     
 

  

 
  Trig Calculator 8 Solves the Following Equation for Xe  
                                                       
  Be+Ae+Xe*( Sin(Ce)+Cos(Ce)+Tan(Ce) ) = Se  
  Coefficient Ae =  
  Coefficient Be =  
  See equation above Se =  
  Angle_Ce_in_Degrees =  
  Calculated results are in red type below  
  Angle Ce in radians =  
  Spreadsheet formula for the above is =RADIANS(Angle_Ce_in_Degrees)  
  Xe =  
  Spreadsheet formula for above is =((Se-(Ae+Be))/(TAN(Ce)))^(1/(SIN(Ce)+COS(Ce)))  
  Calculations are checked here, by substituting the calculated values into  
  the Ae+Be+Tan(Ce)*Xe (SIN(Ce)+COS(Ce)) = Se If the value the user entered  
  for Se is the same as the calculated value for Se, the results are accurate.  
  To prevent rounding errors the following is rounded to decimal places.  
  Calculated value for Se =  
  Spreadsheet formula for above=ROUND(Ae+Be+TAN(Ce)*Xe^(SIN(Ce)+COS(Ce)), Rr)  
  Value user entered for Se =  
  Spreadsheet formula for above =ROUND(Se, Rr)  
   
  Spreadsheet formula for above =IF(CalcForSe=UserForSe,"No Errors","Error" )  
     
 

  

 
  Trig Calculator 9 Solves the Following Equation for X  
                                                     
  Af*Bf+ Xf*( Tan(Cf)+Sin(2*Cf) ) = Sf  
  Coefficient: Af=  
  Coefficient: Bf =  
  See equation above Sf =  
  Angle_Cf_in_Degrees =  
  Calculated results are in red type below  
  Angle Cf in radians =  
  Spreadsheet formula for above is =RADIANS(Angle_Cf_in_Degrees)  
  Xf =  
  Spreadsheet formula for above is =(Sf-Af*Bf)/(TAN(Cf)+SIN(2*Cf))  
  The Calculator checks results by substituting calculated values into the
 
  equation: Af*Bf+ Xf*(Tan(Cf)+Sin(2*Cf)) = Sf If the value the user entered  
  for Sf is the same as the calculated value for Sf, the results are accurate.  
  To prevent rounding errors the following is rounded to decimal places.  
  Calculated value for Sf=  
  Spreadsheet formula for above =ROUND(Af*Bf+ Xf*(TAN(Cf)+SIN(2*Cf)),Rr)  
  Sf =  
  Spreadsheet formula for above is =ROUND(Sf, Rr)  
   
  Spreadsheet formula for =IF(CalcForSf=UserForSf,"No Errors","Error")  
     

 

  Trig Calculator 10 Solves the Following Equation for Xh  
                                                      
  XhSin(Ch) = Sh  
  See equation above: Sh =  
  Angle Ch in Degrees =  
  Calculated results are in red type below  
  Angle Ch in radians =  
  Spreadsheet formula for above is =RADIANS(Angle_Ch_in_Degrees)  
  Sin(Ch) =  
  Spreadsheet formula for above is =SIN(Ch)  
  *Note: SIN(Ch) cannot be greater than 1. This can be used  
  to limit the magnitude of exponents, when devising formulas.  
  Xh =  
  Spreadsheet formula for above is =Sh^(1/SIN(Ch))  
  The Calculator checks results by substituting the calculated values  
  into the equation: XhSin(Ch) = Sh If the value the user entered for Sh  
  is the same, as the calculated value for Sh, the results are accurate.  
  To prevent rounding errors the following is rounded to decimal places.  
  The calculated value for Sh =  
  Spreadsheet formula for the above=IF(Sh=0,"", ROUND(Xh^SIN(Ch), Rr ))  
  Sh=  
  Spreadsheet formula for the above =ROUND(Sh, Rr)  
   
  Spreadsheet formula for above =IF(CalcForSh=UserForSh,"No Errors","Error")  
 

Ten Algebraic-Trig-Calculators Created By David@TechForText.com, ©2010 To contact the author use the email address.

 

Ten Algebraic-Trig-Calculators Created By David@TechForText.com, ©2010 To contact the author use the email address.