Experimental Elapsed Timer for Picoseconds
  Created by David Alderoty © 2012, E-mail David@TechForText.com  
    General Description    
    This elapsed timer measures time in picoseconds, which is one trillionth of a second. Because I do not have equipment to measure tiny units of time, to confirm accuracy, I must consider this device experimental. However, in terms of 5 trillionth picoseconds, or longer, I can easily see that it is accurate.    
       
    This elapsed timer can be used as a countdown timer, if you enter a start time that is in the future. When this is done, you will see a countdown in seconds, which will be displayed with a minus-sign.    
       
    Instructions    
    This elapsed timer is very easy to use. You just type in a start date, and enter a start time, with pull-down menus. (This is explained in more detail, above the related input boxes.)    
    After you enter a start date and time, you must remember to save the settings, if you want to close the software and reopen it at a later point in time, with the same settings. The procedures for saving the Excel and JavaScript versions are different, and they are explained below.    
    You can save theExcel version, in the conventional way that you save an Excel spreadsheet. However, the easiest way to save the Excel version is to press the s key WHILE HOLDING DOWN THE CTRL KEY.    
    The settings in the JavaScript version can only be saved if you open it with the Firefox web browser. To save the settings, with Firefox, press the s key WHILE HOLDING DOWN THE CTRL KEY. When this is done, a dialog box opens with a specific location on your computer, such as your document section, or desktop. Note the file location, or change it to the location you prefer, and then click on the save button in the dialog box.    
       
       
       
               
    This timing device does not display any continuous change in time, with both the JavaScript and Excel versions. It only displays the change in time, when the software is opened and closed, or when data is entered or deleted. With the JavaScript version, there is a button that you can press to update the time. With the Excel version there is a green box, to update the time. For the Excel version, place the cruiser in the green box, and press the delete key, to update the time.    
       
       
   
             
         
    To use this elapsed timer, delete the numbers in the three white boxes below. Then, enter a start date, by entering the month in the first box, the day in the second box, and the year in the third box. All of this must be entered in terms of numbers. Do NOT enter words or letters in these boxes.    
      Enter month with Enter the day with Enter the year      
      a number 1 to12 a number 1 to 31      
           
                 
    The two white boxes below are use to set the start time, with PULL-DOWN MENUS. The box on the left is for hours, and the box on the right is for the minutes. To use the pulldown menu, left click on the LOWER PORTION of the box, on the number. Then you will see either a menu or a silver button on the right side of the box. If you see a silver button, left click on it, to reveal the menu. When the menu appears, scroll up or down the menu, and when you find the number you need, left click on it. When this is done, the menu automatically closes, and the required number will appear in the white box.    
       
       
      Hours   Minutes      
             
                 
    The START date and time YOU entered is:    
       
   
   
   
  Elapsed time in picoseconds, which is one trillionth of a second (1 second = 10^12 ps)  
   
   
     
    With the Excel version, update the time, by placing the cruiser on one of the green sections above, and then press the delete key. For the JavaScript version, left click on the update button.    
       
                 
  The white section below is for writing notes that relate to the entity you are timing.    
  For example, the progress that is made during specific time intervals.  
       
       
       
       
       
       
       
       
     
    With the JavaScript version of this software, you can place your comments in the white box above, and transmit them to the author, by left clicking on the submit button. When this is done, the settings you entered are transmitted along with your message.